Control Chief TM6000 Betreibershandbuch PDF herunterladen (Seite 80)

TM 10-3930-660-10

0006 00-10

OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED 0006 00

TOWING THE 6K FORKLIFT- CONTINUED

4. Remove the four bolts that secure the U-joint and rear propeller shaft to the input yoke of the rear differential. Place

the unattached end of the propeller shaft in the hanger hook provided underneath the vehicle.

5. Remove the four bolts that secure the U-joint and front propeller shaft to the yoke on the front differential. Place the

unattached end of the propeller shaft in the hanger provided underneath the vehicle.

6. Attach the tow bar to the tow lugs of the 6K forklift.

7. Move the towing vehicle into position using a ground guide. Two people are required to lift and connect the tow bar

to the towing vehicle pintle.

8. Release the parking brake.

9. Remove the wheel chocks. Ensure that all personnel and equipment are clear. Proceed to tow with caution.

10. After towing of the 6K forklift is completed, set the parking brake, chock the wheels, and reconnect the propeller

shafts and the steering lines by reversing steps 3 thru 5.

11. Bleed any trapped air from the steering system using the following procedure:

a. Synchronize the steering as described in WP 0005 00.

b. Turn the steering wheel two full turns right and left in all steering modes.

409-054

FRONT PROPELLER

SHAFT WITH U-JOINTS

REAR PROPELLER

SHAFT WITH U-JOINTS

DIFFERENTIAL

INPUT YOKE

(REAR)

DIFFERENTIAL

INPUT YOKE

(FRONT)

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 200 201

Keine Kommentare

Control Chief TM6000 Betreibershandbuch Seite 80