Control Chief TM6000 Betreibershandbuch PDF herunterladen (Seite 133)

TM 10-3930-660-10

0012 00-9

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED 0012 00

Table 1. Preventive Maintenance Checks and Services (PMCS) for 6K Forklift - Continued.

Item

No. Interval

Man-

Hours

Location

Procedure

NOT FULLY MISSION

CAPABLE IF:

Item To

Check/

Service

22 Before Steering Operate two-wheel, four-wheel

and crab steering fully in each

direction. Check to ensure that

steering is smooth and functions

correctly.

Steering is erratic or malfunc-

tions.

WARNING

Before operating boom, ensure that boom will not raise or

extend close to overhead power lines. Failure to follow this

warning may result in injury or death to personnel.

CAUTION

The forks extend beyond the end of the carriage. The opera-

tor must be aware of the swing of the forks when turning and

allow for adequate clearance between forks and other

objects.

23 Before Boom Operate the boom. Extend,

retract, raise and lower boom.

Check that boom operation is

smooth and functions correctly.

Boom operation is erratic or mal-

functions.

24 Before Frame

Tilt

Operate frame tilt fully left and

right.

Frame tilt is erratic or inopera-

tive.

25 Before Auto-

matic

Fork

Level

With fork auto leveler switch

ON, check that forks remain

level when boom is raised and

lowered.

Automatic fork level erratic or

inoperative.

26 Before Fork

Sideshift

Operate fork sideshift. Move

forks left and right together and

apart.

Fork sideshift is erratic or inop-

erative.

27 Before Instru-

ment

Panel

With forklift fully warmed up

check indicators, warning lights

and readings on gages.

Indicators, warning lights or gages

indicate an abnormal reading.

28 Before

Backup

Alarm

and Horn

a. Place transmission in R

(Reverse). Check that backup

alarm functions.

Backup alarm does not function.

b. Press horn button on instru-

ment panel. Horn should

sound.

Horn does not function.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 200 201

Kommentare zu diesen Handbüchern

Keine Kommentare

Control Chief TM6000 Betreibershandbuch Seite 133

Kommentare zu diesen Handbüchern