Control Chief TM6000 Betreibershandbuch PDF herunterladen (Seite 57)

TM 10-3930-660-10

0005 00-5

OPERATION UNDER USUAL CONDITIONS - CONTINUED 0005 00

MOVE FORKLIFT - CONTINUED

WARNING

Do not exceed 45% grade (25 degrees) longitudinally. Forklift becomes unstable and fluid levels are shifted.

Internal components may not be properly lubricated causing vehicle damage. Tires may slip (loss of

traction) or vehicle may tip, causing possible operator injury or death.

(1) With or without rated capacity load, for maximum longitudinal stability, do not exceed 45% grade (25 degrees).

WARNING

Do not exceed 30% grade (17 degrees) laterally. Forklift becomes unstable and fluid levels are shifted. Inter-

nal components may not be properly lubricated causing vehicle damage. Tires may slip (loss of traction)

or vehicle may tip, causing possible operator injury or death.

(2) With or without rated capacity load, for maximum lateral stability, do not exceed 30% grade (17 degrees).

2. Starting Travel Procedures

a. With engine at idle speed, depress the brake pedal to apply the service brakes.

b. Make sure the travel select lever is in the Neutral “N” position.

c. Ensure that the forks are raised at least 24 in. (610 mm) above the ground.

d. Place range select control lever to the desired range.

e. Push parking brake lever down to release the parking brake.

f. Move travel select lever to the Forward “F” position for forward travel, or down to the Reverse “R” position for

reverse travel.

g. Release brake pedal and press the accelerator pedal to control vehicle speed.

409-026

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 200 201

Keine Kommentare

Control Chief TM6000 Betreibershandbuch Seite 57