Control Chief TM6000 Betreibershandbuch PDF herunterladen (Seite 156)

TM 10-3930-660-10

0017 00-2

PRIMARY AND SECONDARY AIR FILTER MAINTENANCE - CONTINUED 0017 00

REMOVAL - CONTINUED

2. Remove wing nut to remove primary filter element.

3. Use a damp cloth to remove dust and foreign material

from inside canister.

SERVICE

CAUTION

The secondary element is not intended to be cleaned. For the maximum engine protection and air cleaner

service life, replace the secondary element with a new one every third primary element change or cleaning.

1. Check secondary element for damage. Replace ele-

ment if it has the slightest damage to gasket or pleated

element.

2. Replace secondary element if element is visibly dirty.

3. If secondary element is to be replaced, remove wing

nut to remove element.

CAUTION

Air restriction indicator will not function properly if an element has a break in the filtering paper or if the

element is not properly seated in the canister.

4. Install new secondary element with gasket end into canister first. Be sure the element is centered in canister before tight-

ening wing nut.

409-065

WING NUT

PRIMARY AIR FILTER

409-066

SECONDARY

AIR FILTER

WING

NUT

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 200 201

Keine Kommentare

Control Chief TM6000 Betreibershandbuch Seite 156